|
| |
Table of Reference Methods Provided
Typical services include: facility compliance demonstration, process trend
monitoring, particle size distribution, facility emission inventories, and air
toxic determinations in accordance with the following methods:
EPA Reference Test Methods performed NSPS, 40CFR Part
60,Appx A
| 1: |
Sample and velocity traverses |
| 2: |
Stack gas flow velocity and volume flow rate |
| 3: |
O2 and CO2 concentrations (includes
version 3A) |
| 4: |
Moisture content in stack gases |
| 5: |
Particulate emissions (includes 5A, 5D, and 5E) |
| 6: |
Sulfur dioxide emissions (includes version 6C) |
| 7: |
Nitrogen oxide emissions (includes version 7E) |
| 8: |
Sulfuric acid mist and sulfur dioxide emissions |
| 9: |
Visible emissions |
| 10: |
Carbon monoxide emissions |
| 11: |
Hydrogen sulfide emissions |
| 12: |
Lead emissions |
| 13b: |
Total fluoride emissions |
| 16a: |
Total reduced sulfur emissions |
| 17: |
Particulate emissions (in-stack filtration method) |
| 18: |
Organic compounds by gas chromatography |
| 19: |
Particulate and nitrogen oxide emission rates |
| 20: |
NOX, SO2, & diluent emissions for gas
turbines |
| 21: |
Volatile organic compound leaks |
| 23: |
Polychlo.dibenzo-p-dioxins & polychlorinated dibenzofurans |
| 25a: |
Total gaseous organic concentrations GC/FID |
| 26: |
Hydrogen chloride emissions |
| 29: |
Determination of Metals Emissions |
NSPS, 40 CFR Part 60, Appendix B
| PS-1: |
Spec. test procedures for opacity CEMS |
| PS-2: |
Spec. test procedures for SO2 NOX CEMS |
| PS-3: |
Spec. test procedures for O2 and CO2 CEMS |
| PS-4: |
Spec. test procedures for CO CEMS |
| PS-5: |
Spec. test procedures for TRS CEMS |
| PS-6: |
Spec. test procedures for emission rate CEMS |
| PS-7: |
Spec. test procedures for H2S CEMS |
NSPS, 40 CFR Part 60, Appendix F
| 1: |
Quality assurance for gas CEM Systems |
NESHAPS, 40 CFR Part 61 & 63
| 101A: |
Particulate and gaseous mercury emissions |
| 104: |
Determination of beryllium emissions |
| 106: |
Determination of vinyl chloride emissions |
| 208: |
Determination of arsenic emissions |
| 306: |
Determination of chromium emissions |
| 308: |
Determination of methanol emissions |
| 316: |
Determination of formaldehyde emissions |
| 10: |
Determination of VOC emissions |
| 30: |
Determination of semivolatile organic compound emissions |
SIP, 40 CFR Part 51, Appendix M
| 201A: |
Determination of PM10 emissions |
| 201B: |
Determination of PM10/PM2.5 emissions |
| 202: |
Determination of condensable PM emissions |
NCASI
| CI/SG-94.02: |
Methanol, Acetone, Acetaldehyde, MEK & Formaldehyde |
| CI/WP-98.01: |
Formaldehyde, Methanol, and Phenol |
| Bulletin 520: |
Cl/ClO2 for Pulp Bleach Plants |
|
